Hdfury 4K HDF0120 HDR HDMI 2-inch audio splitter

Hdfury 4K HDF0120 HDR HDMI 2-inch audio splitter.

Unique HDCP

Providing a total of 6 HDCP 1.4 and 2.2 engines for decrypting encryption, the HDfury Integral offers a comprehensive HDCP bypass solution, including HDCP 2.2> HDCP 1.4 and HDCP 1.4> HDCP 2.2 in both directions within the same unit. It can connect any HDCP1.x or HDCP2.x source device to any HDCP1.x or HDCP 2.x sink device. Each RX block first decrypts the input, whether it is 1.x or 2.x. Then each output port can individually encrypt it to 1.4 (both) or 2.2 (top port only), or not encrypt it at all if it was not originally encrypted. Dual conversion can be handled simultaneously on both channels.

Display HDCP 2.2 content

HDCP 2.2 is a new copy-protection scheme for 4K UHD content which is not only not backward compatible, but many of the latest 4K devices do not even support it. Source devices, including media servers and head-ends such as Netflix, will encode 4K content with this new scheme. TVs must support HDCP 2.2 to play it, and everything in the video chain, including switches and receivers, must also be compliant, otherwise the display will go blank or show an HDCP error message. Bad news for consumers who bought expensive, wideband, processor-rich switches, receivers and displays supporting 4K. Although newer products may support the required 4K bandwidth, they will not play copy-protected tracks until the Integral is an active part of the setup.

2 × 2 splitter up to 4K60 4: 4: 4 600 MHz 18 Gb/s

Splitting any signal up to 4K60 4: 4: 4 600 MHz is now a reality. Via IR, BT, USB or a button, you can easily switch between 2 inputs, which will be replicated to 2 outputs. HDCP conversion can be configured and applied on the fly, to always output the type of HDCP signal encryption that your display or receiving device expects.

HDR

The Integral can inject and extract Infoframe and HDR metadata live, at any resolution and in real time. Using the latest firmware, you can freely turn the HDR MODE of an HDR display on or off with buttons, the app, IR software or the PC USB GUI.

4K60 4: 4: 4 600 MHz 18 Gb/s> 4K60 4: 2: 0 300 MHz 10.2 Gb/s conversion

Until recently, practically all UHD TVs sold could accept 4K60 only as a 4K60 4: 2: 0 300 MHz signal. However, new sources, new displays and current high-end graphics cards generate 4K60 4: 4: 4 (600 MHz - 18 Gb/s). The Integral solves this emerging problem and lets you run the main 4K60 4: 4: 4 600 MHz signal while simultaneously offering a secondary 4K60 4: 2: 0 300 MHz output for level B, limited-bandwidth equipment in your setup.

HDMI audio extraction

The HDfury Integral can extract HDMI audio up to 5.1 and pass through any audio format, including Atmos over HDMI, and has simultaneous analog stereo L R output and up to 5.1 optical S PDIF output via a 3.5 mm combo jack.

External audio replacement

A mini jack input connector (or line mic input) is available to replace the audio in any HDMI DVI-D stream up to 4K60 4: 4: 4 600 MHz 18 Gb/s. Audio replacement works on one channel only, the secondary channel is a direct HDMI to HDMI path. Useful in presentation areas or for simply streaming music from a phone or tablet to an HDMI amplifier.

Advanced EDID management

The most advanced EDID management solution we have ever created is now available in the Integral with: a selected EDID bank, a custom loaded EDID, a self-generated automatic EDID or a fixed basic EDID. Sniff the EDID from connected sink devices, save, edit and load any custom EDID table at any time. Pick any EDID from the factory-loaded list of 25 EDID tables; it loads and resets HPD to automatically present the one you selected. The AutoMix EDID function creates a custom EDID by mixing the EDIDs of both sinks connected to the splitter's output ports. The mixing rules in AutoMix mode can be selected using 4 different algorithms. Some EDID flags can be forced in Automix, such as: Stereo 5.1 Full YCbCr BT2020 HDR 3D.

HDMI CEC Total Commander

The HDfury Integral offers a unique CEC command manager with CEC-compatible equipment. CEC commands allow an HDMI source to send instructions and check connected HDMI devices. Using USB, IR, buttons or the Integral Android Apple app for a smartphone or tablet, the user can configure their own CEC commands and send them LIVE or based on a trigger event.

Total Control

The 4K Integral Total Control app is available in the Google Market for Android mobile devices and tablets and in the AppStore for iOS. You can control the HDfury Integral with a mobile phone or tablet through automatic Bluetooth pairing. A GUI USB tool is also available via a Windows computer, along with IR control and various physical buttons for configuration. Thanks to the community, a list of pronto IR codes has been added to iRule and Logitech Harmony for even easier and trouble-free integration.

HTPC mode

Do you have a problem with an AVR or display connected to the HTPC output, such as a problem resuming from standby or something similar? The Integral now has a unique and exclusive HTPC mode in which nothing that happens on the output is ever reported to the source device. It now goes beyond what EDID detective and Dr.HDMI can offer and is the best solution for solving HTPC problems.

Split screen

Whether you need to split a 600 MHz stream into 2x300 MHz to make video processing easier, connect a longer HDMI cable, or even use an IP extender. This brand-new feature, which has just been released, lets each Integral act as a TX to split the input or as an RX to merge a 2x300 MHz stream into a single 600 MHz stream. Split Screen also offers a solution for delivering a native, uncompressed 4K60 signal to a PRO PJ such as the JVC DLA-SH4KNL, which accepts 2x DVI input to recombine the 4K image.

Specifications

Type: HDMI matrix switch. Resolution: 3840 x 2160. Input side connectors: 2 x HDMI socket. Output side connectors: 2 x HDMI socket. 2x input 2x output splitter (compatible with HDMI2.0a, HDMI1.4, DVI1.0). 4K60 4: 2: 0 300 MHz 10.2 Gb/s Passthrough. 4K60 4: 2: 0 4K60 4: 2: 0 300 MHz 10.2 Gb/s conversion. HDCP Doctor (HDCP bypass for any HDCP error). HDCP 2.2> HDCP 1.4 conversion. HDCP 1.4> HDCP 2.2 conversion. HDCP xx> HDCP xx conversion. Two connected HDMI2.0a and HDMI 1.4 ports. Color: black. Used product.

Package contents

1 x Hdfury 4K HDR HDMI 2-inch audio splitter. Used product. Checked and tested, fully functional, practically like new. No packaging. No instructions.

See also: Cree products.